Pumps
Solids - Slurry Vacuum Pumps
- Home
- > Products
- > Pumps
- > Solids - Slurry Vacuum Pumps
- > Heavy Duty Solids Vacuum Pump (SV510V)
Heavy Duty Solids Vacuum Pump (SV510V)
Compact and with a relatively small footprint, the SV510 is capable of operating on a wide array of materials with very high solids content.
Technical Properties
- 174 cm
- 110 cm
- 209 cm
- 860 kg
- 600 cfm (284 L/sec) jet pack and requires 750 cfm (354 L/sec) using air assisted discharge option minimum 95psi (6.5 bar) to 115psi (7.9 bar) at the pump
- 50 mm (2 inch)
- Up to 25inHg+ (85kPa)
- 100 mm (4 inch)
- 125 mm (5 inch)
- Up to 70 mm
Areas of Usage
- Capture and transfer of drill cuttings, Slurry transfer, Thickener de-sludging, Mud and tailings transfer, Pit and sump cleaning, Hazardous waste recovery, Oil sludge and tank bottoms residue transfer, Tank Cleaning and sludge extraction, Vacuum cleaning or barge and vessel bottoms, Heavy crude transfer, Bulk transfer, load and unload
Features
- ATEX Zone 2 / CE conformity, ATEX material level / temperature highest possible, 100% compressed air operation, intrinsically safe, Master / slave option for two pumps, Control box, quick connect / disconnect with indicators for easy diagnostic / visual of operation, No internal workings, minimal maintenance, Manual or fully automatic operation, Throughput capacity up to and in excess of 45 m3/hr (198USGPM) @ SG1.0 depending on the materials and distances involved, Generates 25inHg+ (85kPa) vacuum using 600cfm (284 L/sec) jet pack and requires 750 cfm (354 L/sec) using air assisted discharge option at minimum 95psi (6.5 bar) to 115psi (7.9 bar) at the pump, 100mm (4inch) Vacuum Load, 250mm (10inch) top load / gravity feed with 100mm (4inch) vent
Material Options
- Carbon steel vessel